dmesg - NVIDIA Quadro FX 580
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-122-generic (buildd@lcy01-amd64-005) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #146-Ubuntu SMP Mon Apr 23 15:34:04 UTC 2018 (Ubuntu 4.4.0-122.146-generic 4.4.117)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000baf8ffff] usable
BIOS-e820: [mem 0x00000000baf90000-0x00000000bafb2fff] ACPI NVS
BIOS-e820: [mem 0x00000000bafb3000-0x00000000bafeffff] ACPI data
BIOS-e820: [mem 0x00000000baff0000-0x00000000baffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. Z68P-DS3/Z68P-DS3, BIOS F1 05/19/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-CEFFF uncachable
CF000-D1FFF write-protect
D2000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0C0000000 mask FC0000000 uncachable
2 base 0BC000000 mask FFC000000 uncachable
3 base 0BB800000 mask FFF800000 uncachable
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask FC0000000 write-back
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3GB, range: 1GB, type UC
reg 2, base: 3008MB, range: 64MB, type UC
reg 3, base: 3000MB, range: 8MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 1GB, type WB
total RAM covered: 8120M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3000MB, range: 8MB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 1GB, type WB
e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbaf90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5aa0-0x000f5aaf] mapped at [ffff8800000f5aa0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 28672
reserving inaccessible SNB gfx pages
BRK [0x02216000, 0x02216fff] PGTABLE
BRK [0x02217000, 0x02217fff] PGTABLE
BRK [0x02218000, 0x02218fff] PGTABLE
BRK [0x02219000, 0x02219fff] PGTABLE
BRK [0x0221a000, 0x0221afff] PGTABLE
BRK [0x0221b000, 0x0221bfff] PGTABLE
RAMDISK: [mem 0x3375a000-0x35ba4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7620 000014 (v00 GBT )
ACPI: RSDT 0x00000000BAFB3040 000050 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000BAFB3100 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000BAFB31C0 0050C4 (v01 GBT GBTUACPI 00001000 MSFT 04000000)
ACPI: FACS 0x00000000BAF90000 000040
ACPI: MSDM 0x00000000BAFB8400 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000BAFB84C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000BAFB8540 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: ASPT 0x00000000BAFB8600 000034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
ACPI: SSPT 0x00000000BAFB8640 002324 (v01 GBT SsptHead 312E3042 UTBG 01010101)
ACPI: EUDS 0x00000000BAFBA970 0000C0 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000BAFBAA30 0008EA (v01 GBT GBT B0 5455312E BG?? 45240101)
ACPI: APIC 0x00000000BAFB8300 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000BAFBB340 001F4C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: MATS 0x00000000BAFBD2C0 00A518 (v01 MATS RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
NODE_DATA(0) allocated [mem 0x23fdf6000-0x23fdfafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000baf8ffff]
node 0: [mem 0x0000000100000000-0x000000023fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fdfffff]
On node 0 totalpages: 2075948
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11903 pages used for memmap
DMA32 zone: 761744 pages, LIFO batch:31
Normal zone: 20472 pages used for memmap
Normal zone: 1310208 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbaf90000-0xbafb2fff]
PM: Registered nosave memory: [mem 0xbafb3000-0xbafeffff]
PM: Registered nosave memory: [mem 0xbaff0000-0xbaffffff]
PM: Registered nosave memory: [mem 0xbb000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xbb000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88023fa00000 s99544 r8192 d31528 u262144
pcpu-alloc: s99544 r8192 d31528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2043353
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8048940K/8303792K available (8532K kernel code, 1313K rwdata, 3996K rodata, 1508K init, 1316K bss, 254852K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3109.324 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6218.64 BogoMIPS (lpj=12437296)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
FEATURE SPEC_CTRL Not Present
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 mitigation: Mitigation: Full generic retpoline
Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
Freeing SMP alternatives memory: 32K
ftrace: allocating 32202 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
core: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24874.59 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbaf90000-0xbafb2fff] (143360 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:26:42, date: 05/01/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:02.0: [8086:0102] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xff00-0xff3f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io 0xfd00-0xfd03]
pci 0000:00:1f.2: reg 0x18: [io 0xfc00-0xfc07]
pci 0000:00:1f.2: reg 0x1c: [io 0xfb00-0xfb03]
pci 0000:00:1f.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:02:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:03:00.0: [1283:8892] type 01 class 0x060401
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xbfa00000-0xfebfffff window] (subtractive decode)
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xbfa00000-0xfebfffff window] (subtractive decode)
pci 0000:05:00.0: [10de:0659] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:05:00.0: reg 0x1c: [mem 0xf6000000-0xf7ffffff 64bit]
pci 0000:05:00.0: reg 0x24: [io 0xdf00-0xdf7f]
pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:05:00.0
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbaf90000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x0805] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0400-0x04cf] has been reserved
system 00:02: [io 0x04d2-0x04ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x1000-0x107f] has been reserved
system 00:03: [io 0x1080-0x10ff] has been reserved
system 00:03: [io 0x1100-0x117f] has been reserved
system 00:03: [io 0x1180-0x11ff] has been reserved
system 00:03: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
system 00:04: [io 0x0454-0x0457] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x000d3000-0x000d3fff] has been reserved
system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:06: [mem 0xbaf90000-0xbafeffff] could not be reserved
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x00100000-0xbaf8ffff] could not be reserved
system 00:06: [mem 0xbaff0000-0xbaffffff] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:06: [mem 0xfed20000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
system 00:06: [mem 0x000e0000-0x000effff] has been reserved
system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
system 00:06: [mem 0x40000000-0x400fffff] could not be reserved
system 00:06: [mem 0xbb000000-0xbf9fffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xbfa00000-0xbfbfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbfc00000-0xbfdfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfbfffff]
pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:05:00.0: BAR 6: assigned [mem 0xf9000000-0xf907ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 9 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xbfa00000-0xbfbfffff]
pci_bus 0000:01: resource 2 [mem 0xbfc00000-0xbfdfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:03: resource 9 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:04: resource 9 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:05: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:05:00.0: Video device with shadowed ROM
PCI: CLS 4 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 37164K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb6f90000-0xbaf90000] (64MB) mapped at [ffff8800b6f90000-ffff8800baf8ffff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1525192002.620:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-122-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-122-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x17
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x17
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x17
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: eb3f78ccfd14bc84ef58e051a28e8b7731c2f6e2'
zswap: loaded using pool lzo/zbud
Key type trusted registered
usb 1-1: new high-speed USB device number 2 using ehci-pci
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 2:140:438
rtc_cmos 00:01: setting system clock to 2018-05-01 16:26:43 UTC (1525192003)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1508K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1696K
Freeing unused kernel memory: 100K
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
usb 2-1: new high-speed USB device number 2 using ehci-pci
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000e70000, 50:e5:49:50:af:75, XID 0c900800 IRQ 24
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[drm] Initialized drm 1.1.0 20060810
r8169 0000:02:00.0 enp2s0: renamed from eth0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 25
ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 25
ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 25
ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 25
ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 25
ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 25
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0xbba00000 - 0xbfa00000]
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-1.6: new high-speed USB device number 3 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST500DM002-1BD142, KC65, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC65 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3109.130 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd0f856884, max_idle_ns: 440795273238 ns
usb 1-1.6.1: new low-speed USB device number 4 using ehci-pci
usb 1-1.6.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.1: Product: USB OPTICAL MOUSE
usb 1-1.6.1: Manufacturer: PIXART
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:093A:2510.0001/input/input3
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.6.1/input0
usb 1-1.6.2: new low-speed USB device number 5 using ehci-pci
usb 2-1.2: new high-speed USB device number 3 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-1.6.2: New USB device found, idVendor=413c, idProduct=2005
usb 1-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.2: Product: DELL USB Keyboard
usb 1-1.6.2: Manufacturer: DELL
ata2.00: ATAPI: ASUS DRW-24B1ST a, 1.04, max UDMA/100
ata2.00: configured for UDMA/100
input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/0003:413C:2005.0002/input/input4
scsi 1:0:0:0: CD-ROM ASUS DRW-24B1ST a 1.04 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
hid-generic 0003:413C:2005.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-1.6.2/input0
usb 2-1.2: New USB device found, idVendor=0bda, idProduct=0109
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: USB2.0-CRW
usb 2-1.2: Manufacturer: Generic
usb 2-1.2: SerialNumber: 20090815198100000
usb-storage 2-1.2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-1.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata3: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
ata6: SATA link down (SStatus 0 SControl 300)
sd 6:0:0:0: [sdb] 7626752 512-byte logical blocks: (3.90 GB/3.64 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Braille Device Support.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Mounting Debug File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[224]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:05:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.104 Thu Sep 14 17:13:13 PDT 2017
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
gpio_ich: GPIO from 436 to 511 on gpio_ich
nvidia_uvm: Loaded the UVM driver, major device number 245
audit: type=1400 audit(1525192017.855:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=759 comm="apparmor_parser"
audit: type=1400 audit(1525192017.855:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=759 comm="apparmor_parser"
audit: type=1400 audit(1525192017.887:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=755 comm="apparmor_parser"
audit: type=1400 audit(1525192017.887:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=755 comm="apparmor_parser"
audit: type=1400 audit(1525192017.951:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1525192017.951:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1525192017.951:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1525192017.951:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1525192017.971:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1525192018.043:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=782 comm="apparmor_parser"
Adding 998396k swap on /dev/sda5. Priority:-1 extents:1 across:998396k FS
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3109125501 Hz
vboxdrv: Successfully loaded version 5.1.34_Ubuntu (interface 0x002a0000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-1.2: USB disconnect, device number 3
usb 1-1.6: clear tt 1 (0050) error -71
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6: clear tt 1 (0040) error -71
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
hub 1-1.6:1.0: hub_ext_port_status failed (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6: USB disconnect, device number 3
usb 1-1.6.1: USB disconnect, device number 4
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6.2: USB disconnect, device number 5
usb 1-1.6: new high-speed USB device number 6 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 4 ports detected
usb 1-1.6.1: new low-speed USB device number 7 using ehci-pci
usb 1-1.6.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.1: Product: USB OPTICAL MOUSE
usb 1-1.6.1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:093A:2510.0003/input/input10
hid-generic 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.6.1/input0
usb 1-1.6.2: new low-speed USB device number 8 using ehci-pci
usb 1-1.6.2: New USB device found, idVendor=413c, idProduct=2005
usb 1-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.2: Product: DELL USB Keyboard
usb 1-1.6.2: Manufacturer: DELL
input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/0003:413C:2005.0004/input/input11
hid-generic 0003:413C:2005.0004: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-1.6.2/input0
usb 1-1.6: clear tt 1 (0070) error -71
usb 1-1.6: clear tt 1 (0080) error -71
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6: USB disconnect, device number 6
usb 1-1.6.1: USB disconnect, device number 7
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6.2: USB disconnect, device number 8
usb 1-1.6: new high-speed USB device number 9 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 4 ports detected
usb 1-1.6.1: new low-speed USB device number 10 using ehci-pci
usb 1-1.6.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.1: Product: USB OPTICAL MOUSE
usb 1-1.6.1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:093A:2510.0005/input/input12
hid-generic 0003:093A:2510.0005: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.6.1/input0
usb 1-1.6.2: new low-speed USB device number 11 using ehci-pci
usb 1-1.6.2: New USB device found, idVendor=413c, idProduct=2005
usb 1-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.2: Product: DELL USB Keyboard
usb 1-1.6.2: Manufacturer: DELL
input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/0003:413C:2005.0006/input/input13
hid-generic 0003:413C:2005.0006: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-1.6.2/input0
usb 1-1.6: USB disconnect, device number 9
usb 1-1.6.1: USB disconnect, device number 10
usb 1-1.6.2: USB disconnect, device number 11
usb 1-1.6: new high-speed USB device number 12 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 4 ports detected
usb 1-1.6.1: new low-speed USB device number 13 using ehci-pci
usb 1-1.6.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.1: Product: USB OPTICAL MOUSE
usb 1-1.6.1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:093A:2510.0007/input/input14
hid-generic 0003:093A:2510.0007: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.6.1/input0
usb 1-1.6.2: new low-speed USB device number 14 using ehci-pci
usb 1-1.6.2: New USB device found, idVendor=413c, idProduct=2005
usb 1-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.2: Product: DELL USB Keyboard
usb 1-1.6.2: Manufacturer: DELL
input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/0003:413C:2005.0008/input/input15
hid-generic 0003:413C:2005.0008: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-1.6.2/input0
usb 1-1.6: clear tt 1 (00d0) error -71
usb 1-1.6: clear tt 1 (00e0) error -71
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
hub 1-1.6:1.0: hub_ext_port_status failed (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6: USB disconnect, device number 12
usb 1-1.6.1: USB disconnect, device number 13
usb 1-1.6.2: USB disconnect, device number 14
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6: new high-speed USB device number 15 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 4 ports detected
usb 1-1.6.1: new low-speed USB device number 16 using ehci-pci
usb 1-1.6.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.1: Product: USB OPTICAL MOUSE
usb 1-1.6.1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:093A:2510.0009/input/input16
hid-generic 0003:093A:2510.0009: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.6.1/input0
usb 1-1.6.2: new low-speed USB device number 17 using ehci-pci
usb 1-1.6.2: New USB device found, idVendor=413c, idProduct=2005
usb 1-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.2: Product: DELL USB Keyboard
usb 1-1.6.2: Manufacturer: DELL
input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/0003:413C:2005.000A/input/input17
hid-generic 0003:413C:2005.000A: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-1.6.2/input0
usb 2-1.2: new high-speed USB device number 4 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0bda, idProduct=0109
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: USB2.0-CRW
usb 2-1.2: Manufacturer: Generic
usb 2-1.2: SerialNumber: 20090815198100000
usb-storage 2-1.2:1.0: USB Mass Storage device detected
scsi host7: usb-storage 2-1.2:1.0
scsi 7:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] 7626752 512-byte logical blocks: (3.90 GB/3.64 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 7:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-1.2: USB disconnect, device number 4
usb 1-1.6: clear tt 1 (0100) error -71
usb 1-1.6: clear tt 1 (0110) error -71
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: cannot reset (err = -71)
usb 1-1.6-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port1: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6-port2: cannot disable (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6: USB disconnect, device number 15
usb 1-1.6.1: USB disconnect, device number 16
usb 1-1.6-port2: cannot reset (err = -71)
usb 1-1.6-port2: Cannot enable. Maybe the USB cable is bad?
usb 1-1.6.2: USB disconnect, device number 17
usb 1-1.6: new high-speed USB device number 18 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 4 ports detected
usb 1-1.6.1: new low-speed USB device number 19 using ehci-pci
usb 1-1.6.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.1: Product: USB OPTICAL MOUSE
usb 1-1.6.1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:093A:2510.000B/input/input18
hid-generic 0003:093A:2510.000B: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.6.1/input0
usb 1-1.6.2: new low-speed USB device number 20 using ehci-pci
usb 1-1.6.2: New USB device found, idVendor=413c, idProduct=2005
usb 1-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.2: Product: DELL USB Keyboard
usb 1-1.6.2: Manufacturer: DELL
input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/0003:413C:2005.000C/input/input19
hid-generic 0003:413C:2005.000C: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-1.6.2/input0
usb 2-1.2: new high-speed USB device number 5 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0930, idProduct=1400
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: USB DISK 3.0
usb 2-1.2: Manufacturer:
usb 2-1.2: SerialNumber: 7F00795EB052A200
usb-storage 2-1.2:1.0: USB Mass Storage device detected
scsi host8: usb-storage 2-1.2:1.0
scsi 8:0:0:0: Direct-Access USB DISK 3.0 DL07 PQ: 0 ANSI: 6
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 15138816 512-byte logical blocks: (7.75 GB/7.22 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 8:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-1.2: USB disconnect, device number 5
usb 2-1.2: new high-speed USB device number 6 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0930, idProduct=1400
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: USB DISK 3.0
usb 2-1.2: Manufacturer:
usb 2-1.2: SerialNumber: 7F00795EB052A200
usb-storage 2-1.2:1.0: USB Mass Storage device detected
scsi host9: usb-storage 2-1.2:1.0
scsi 9:0:0:0: Direct-Access USB DISK 3.0 DL07 PQ: 0 ANSI: 6
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] 15138816 512-byte logical blocks: (7.75 GB/7.22 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 9:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1.2: USB disconnect, device number 6
FAT-fs (sdb1): unable to read boot sector to mark fs as dirty